F 150 4WD V8-4.6L VIN 8 (2010)
Power Seat Switch: Service and Repair
Memory Set Switch
Memory Set Switch
Removal and Installation
NOTE: For parts identification and location, refer to Seat - Exploded View, Front See: Body and Frame/Seats/Service and Repair/Front Seats/Seat -
Exploded View, Front.
1. Remove the side shield insert.
-
Release the lower retainers and lift to release the upper retainers.
-
Disconnect the seat control switch electrical connector.
-
Disconnect the memory SET switch electrical connector.
2. Release the retaining tabs and remove the switch.
3. To install, reverse the removal procedure.