F 150 4WD V8-4.6L VIN 8 (2010)
17. NOTICE: To prevent selector lever cable damage, do not apply force to the selector lever cable between the manual control lever and the
selector lever cable bracket.
NOTE: When installing the selector lever cable end, make sure that the selector lever cable end is correctly installed onto the manual control
lever. Pull back on the selector lever cable end to make sure that the selector lever cable end is securely installed onto the manual control lever.
Install the selector lever cable end onto the manual control lever.
18. Lock the selector lever cable lock tab.
19. If equipped, install the heat shield.
20. Make sure the transmission fluid is at the correct level, follow the steps for Adding Additional Transmission Fluid or Removing Transmission
Fluid. For additional information, refer to Transmission Fluid Drain and Refill See: Service and Repair/Procedures/6R80/Transmission Fluid
Drain and Refill.