F 150 4WD V8-4.6L VIN 8 (2010)
4. Remove and discard the LH selector lever knob cover.
1. Start at the bottom front.
2. Move towards the top front and remove the cover.
5. Remove and discard the RH selector lever knob screw.
6. NOTE: Verify the LH and RH knob body towers are present and not damaged.
Remove and discard the LH selector lever knob screw.
7. Disconnect the Tow/Haul switch electrical connector and remove the selector lever knob.
Installation
1. Connect the Tow/Haul switch electrical connector and install the selector lever knob.
