F 150 4WD V8-4.6L VIN 8 (2010)
2. Install the isolator cap and bolt.
-
Tighten to 35 Nm (26 lb-ft).
3. Install the transmission support crossmember and 4 bolts.
-
Tighten to 115 Nm (85 lb-ft).
2. Install the isolator cap and bolt.
-
Tighten to 35 Nm (26 lb-ft).
3. Install the transmission support crossmember and 4 bolts.
-
Tighten to 115 Nm (85 lb-ft).