Location of Transmission Position Switch/Sensor on F 150 4WD V8-46L VIN 8
3. Disconnect the Transmission Range (TR) electrical connector.
4. NOTICE: Discard the manual control lever shaft outer nut. Do not reuse. The old nut will not retain the torque specification.
Remove the manual control lever.
1. Remove and discard the manual control lever outer nut.
2. Remove the manual control lever.
5. Remove the TR sensor bolts and the TR sensor.
Installation
1. Install the TR sensor and loosely install the bolts.
2. NOTE: The manual control lever must be in the NEUTRAL position.
Using the TR Sensor Alignment Gauge, align the TR sensor slots. The tool is designed to fit snugly.