F 150 4WD V8-4.6L VIN 8 (2010)
Transmission Speed Sensor: Service and Repair
Output Shaft Speed (OSS) Sensor
4R70E/4R75E
Output Shaft Speed (OSS) Sensor
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Disconnect the Output Shaft Speed (OSS) sensor connector.
3. Remove the OSS sensor bolt and the sensor.
-
To install, tighten to 12 Nm (106 lb-in).
4. To install, reverse the removal procedure.