F 150 4WD V8-4.6L VIN 8 (2010)
2. Apply a new continuous bead of sealant to the differential housing cover.
3. NOTE: The differential housing cover must be installed within 15 minutes of application of the silicone sealant, or new sealant must be applied. If
possible, allow one hour before filling the axle housing with axle lubricant to make sure the silicone sealant has correctly cured.
Install the differential housing cover and the 10 differential housing cover bolts.
-
Tighten to 45 Nm (33 lb-ft).
4. NOTE: When filling a Traction-Lok(R) axle with new lubricant, first fill the axle with 118 ml (4 oz) of friction modifier.
Remove the filler plug, fill the axle with 2.8L (6.0 pt) of axle lubricant and install the filler plug.
-
Tighten to 52 Nm (38 lb-ft).
