F 150 4WD Pickup V8-281 4.6L VIN W EFI (1997)
Brake Rotor/Disc: Technical Service Bulletins
Brake Rotor - Incorrect Discard Thickness Specification
Article No.
99-25-6
12/13/99
^
BRAKES - INCORRECT ROTOR THICKNESS
STAMPED ON ROTOR - F-150 4X2 ONLY
^
BRAKES - INCORRECT WORKSHOP MANUAL
ROTOR DISCARD THICKNESS SPECIFICATION
FORD:
1997-2000 EXPEDITION, F-150, F-250 LD
LINCOLN:
1998-2000 NAVIGATOR
ISSUE
The 1997-2000 Workshop Manuals do not provide the correct and complete specification for rotor discard thickness. Additionally, some 4X2 F-150
rotors may have an incorrect rotor discard thickness stamped on them.
Updated Information Per TSB 99-25-6
ACTION
Refer to the Front and Rear Disc Rotor Discard Specification Charts for correct rotor discard specification.
*
SOME 4X2 F-150 ROTORS SHOW "24.7 mm" PRINTED ON THE ROTOR BACK SIDE. THIS IS AN ERROR, THESE CAN BE CUT TO 24.5
mm DISCARD THICKNESS.
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 301000, 390000