F 150 4WD Pickup V8-281 4.6L VIN W EFI (1997)
Control Assembly: Service and Repair
Control Assembly, HVAC
Bulbs
CLIMATE CONTROL HEAD ILLUMINATION
Removal
1. Remove the climate control head.
2. Remove the two illumination bulbs.
Installation
1. To install, reverse removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16km (10 miles) or more to relearn the strategy.
Climate Control Head
REMOVAL
WARNING: TO AVOID ACCIDENTAL DEPLOYMENT AND POSSIBLE INJURY, THE AIR BAG BACKUP POWER SUPPLY MUST
BE DEPLETED BEFORE SERVICING OR REPLACING ANY AIR BAG SYSTEM COMPONENTS. TO DEPLETE THE BACKUP
POWER SUPPLY ENERGY, DISCONNECT THE BATTERY TO STARTER RELAY CABLE AND WAIT ONE MINUTE.
1. Disconnect the battery cables.
1. Disconnect the battery ground cable.
2. Disconnect the battery to starter relay cable.