F 150 4WD Pickup V8-281 4.6L VIN W EFI (1997)
Refrigerant Pressure Sensor / Switch: Service and Repair
A/C Cycling Switch
REMOVAL
1. Disconnect the A/C cycling pressure switch electrical connector.
2. Remove the A/C cycling switch from the top of the suction accumulator/drier.
INSTALLATION
1. Lubricate the new O-ring seal.
^
Use YN-12b Compressor Oil F2AZ-19577-AC or equivalent meeting Ford specification WSH-M1C231-B.
2. Install the A/C cycling switch onto the top of the suction accumulator/drier.
3. Reconnect the A/C cycling pressure switch wiring connector.
4. Check for refrigerant leaks.