F 150 4WD Pickup V8-281 4.6L VIN W EFI (1997)
5.
Install both rear wheels. Torque lug nuts to 135 Nm (100 lb-ft) plus 1/8 to 1/4 additional turn. See Figure 5 for lug nut tightening sequence.
6.
Lower the vehicle.
REAR SPRING REPLACEMENT
NOTE:
Replacement springs do not require spring clip installation.
1.
Remove the tire and wheel assembly.
2.
Position an adjustable jack under the rear axle.
3.
Raise the jack enough to support the rear axle. Do not put tension on the rear springs.
