F 150 4WD Pickup V8-281 4.6L VIN W EFI (1997)
10. Use (A) Reverse Clutch Spring Compressor T80L-77405-A and (B) Clutch Spring Compressor T65L-77515-A to compress the (C) reverse clutch
piston spring.
11. Install the reverse clutch piston spring retaining ring.
12. Remove Reverse Clutch Spring Compressor T80L-77405-A and Clutch Spring Compressor T65L-77515-A.
13. Install the reverse clutch front pressure plate, clutch pack and reverse clutch rear pressure plate.
NOTE:
-
Before assembly, soak new clutch discs in transmission fluid for 15 minutes.
-
Install the pressure plates with the flat sides facing the clutch pack.
14. Install the reverse clutch pressure plate retainer snap ring.
