F 150 4WD Pickup V8-281 4.6L VIN W EFI (1997)
CAUTION: Discard outer manual control lever shaft nut. Do not reuse.
8. Remove the transmission range TR or DTR sensor.
(1) Remove the two bolts.
(2) Remove the TR sensor.
9. Remove the manual control valve detent lever spring.
(1) Remove the bolt.
(2) Remove the manual control valve detent lever spring.
10. Remove the manual lever shaft retaining pin.
NOTE: Use a shop cloth to protect the transmission case surface.
11. Remove the inner manual control lever shaft nut and slide the manual control lever shaft out of the case.