F 150 4WD Pickup V8-281 4.6L VIN W EFI (1997)
24. Remove the front axle universal joint flange.
(1) With the (A) pinion nut still engaged by a few threads, install (B) 2-Jaw Puller.
(2) Remove the front axle universal joint flange.
25. Remove the pinion from the carrier housing.
(1) Hold the pinion inside carrier housing.
(2) Use a soft face hammer; remove the pinion from the carrier housing.
26. Remove the pinion seal.
CAUTION: Do not damage the front axle housing while removing the pinion seal.
27. Use (A) Puller Tool and (B) Slide Hammer to remove the inner bearing cup.
28. If necessary, remove the baffle.