F 150 4WD Pickup V8-281 4.6L VIN W EFI (1997)
5. Remove the driveshaft centering socket yoke.
(1) Position the driveshaft centering socket yoke in U-Joint Tool.
(2) Press out a bearing cup.
(3) Remove the driveshaft centering socket yoke.
6. Press out the driveshaft centering socket yoke universal joint bearing cups.
(1) Position the yoke in U-Joint Tool.
(2) Press out the bearing cup.
(3) Rotate the yoke.
(4) Press out the remaining bearing cup.
7. Remove the four remaining snap rings.
8. Remove the centering cup spring.
