F 150 4WD Pickup V8-281 4.6L VIN W EFI (1997)
Synchronizer Ring: Service and Repair
DISASSEMBLY
1. Disassemble the synchronizer.
(1) Remove one retaining spring.
(2) Flip the synchronizer over and remove the opposite retaining spring.
(3) Remove the three insert keys.
(4) Remove the sleeve.
NOTE: Mark parts for assembly.
2. Inspect all the synchronizer components for wear and damage.
ASSEMBLY
1. Inspect all the synchronizer components for wear and damage.
2. Assemble the synchronizer.
(1) Install the sleeve.
(2) Install the three insert keys.
(3) Install the retaining spring.
(4) Flip the synchronizer over and install the opposite retaining spring.
NOTE: Match the marked parts for assembly.