F 150 4WD Pickup V8-281 4.6L VIN W EFI (1997)
Reverse Idler Gear: Service and Repair
DISASSEMBLY
1. Disassemble the reverse idler gear.
(1) Remove the reverse idler gear retaining ring.
(2) Remove the spacer.
(3) Remove the reverse idler gear and bushing.
(4) Remove the reverse idler gear bearing.
(5) Remove the reverse idler gear thrust washer
ASSEMBLY
1. Assemble the reverse idler gear.
(1) Install the reverse idler gear thrust washer.
(2) Install the reverse idler gear bearing.
(3) Install the reverse idler gear and bushing.
(4) Install the spacer.
(5) Install the reverse idler gear retaining ring.
2. Measure the reverse idler near end play
-
If end play is not within specification, install a retaining ring of proper thickness.