F 150 4WD Pickup V8-351 5.8L VIN G 2-bbl (1984)
Engine Mount: Service and Repair
Fig. 7 Engine mounts. F-100---350 & Bronco w/V8-255, 302, 351W engine
F-100-350 & Bronco
1.
Remove fan shroud attaching bolts and position shroud over fan.
2.
Remove insulator-to-chassis bracket attaching nut and washer.
3.
Raise engine slightly, then remove insulator attaching bolts and the insulator, Fig. 7. When removing lefthand insulator, the heat shield must
also be removed.
4.
Reverse procedure to install.