F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
8. On engines equipped with bolt on sprockets, install the camshaft sprocket (2).
1. Install the bolt (1).
2. Tighten the bolt.
^
M10 bolt: Tighten in two stages.
^
Stage 1: Tighten to 40 Nm (30 ft. lbs.).
^
Stage 2: Tighten an additional 90 degrees.
^
M12 bolt: Tighten to 120 Nm (90 ft. lbs.).
All vehicles
9. Install the roller followers.
10. Install the timing chains.