F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
Fog/Driving Lamp Bulb: Service and Repair
REMOVAL
WARNING: THE HALOGEN BULB CONTAINS GAS UNDER PRESSURE. THE BULB MAY SHATTER IF THE GLASS ENVELOPE IS
SCRATCHED OR IF THE BULB IS DROPPED. HANDLE THE BULB ONLY BY ITS BASE. AVOID TOUCHING THE GLASS
ENVELOPE.
NOTE: The fog lamp bulb should not be removed from the fog lamp until just before a new bulb is installed. Removing the bulb for an extended period
of time may affect fog lamp bulb performance. Contaminants may enter the fog lamp where they can settle on the lens and reflector. Never turn on the
fog lamps with the bulb removed.
1. Disconnect the fog lamp bulb electrical connector.
2. Rotate the fog lamp socket counterclockwise and remove.
INSTALLATION
1. To install, reverse the removal procedure.