F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
Fuel Cut Valve Solenoid (CNG): Service and Repair
Standard Models (Non Bi-Fuel)
REMOVAL
1. Remove the fuel tank(s).
2. Remove the fuel tank solenoid valve electrical connector.
1
Remove the retaining screws.
2
Remove the fuel tank solenoid valve electrical connector.
CAUTION: When removing the fuel tank solenoid valve electrical connector, it is possible that the connector pins may disengage from the
solenoid valve.
3. Remove the fuel tank solenoid valve.
INSTALLATION
1. Follow the removal procedure in reverse order.
NOTE:
^
Replace fuel tank solenoid O-ring seal.
^
Lubricate the fuel tank solenoid O-ring seal with 5W30 engine oil meeting Ford specification WSS-M2C153-G or equivalent prior to
installation, to help seal and ease the installation.
