F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
1. To install, reverse the removal procedure.
NOTE:
^
Install a new fuel line face seal O-rings.
^
Lubricate the fuel line O-ring seals with Motorcraft Super Premium SAE 5W-30 motor oil X0-5W30-QSP meeting Ford specification
WSS-M2C153-G or equivalent prior to installation to help seal and ease the installation.
^
When tightening the fuel lines, a torque wrench adapter must be used with the torque wrench. The use of a torque wrench adapter will alter the
effective torque of the torque wrench being used. To correct the effective torque, a torque multiplication conversion must be used.
2. Carry out the Fuel System Leak Test procedure. See: Testing and Inspection/Fuel System Leak Test/Standard Models (Non Bi-Fuel)
