F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
1. Position the power steering pressure hose into the pump.
2. Tighten the pressure hose fitting.
3. Position the power steering pump and loosely install the power steering pump bolts.
4. Tighten the power steering pump upper bolts.
5. Tighten the power steering pump lower bolt.
6. Connect the power steering reservoir pump hose to the power steering pump.
7. Lower the vehicle.
8. Connect the power steering pressure hose to the steering gear.
9. Install the drive belt.
10. Install the engine air cleaner assembly.
11. Fill and leak check the system.