F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
5. WARNING: Lower the rear axle only enough to gain access to the rear spring.
Separate the rear spring from the rear axle.
1. Remove the nuts.
2. Remove the U-bolts.
3. Remove the rear spring plates.
4. Carefully lower the rear axle.
5. On 4x4 vehicles, remove the rear spring spacer.
6. Remove the rear spring.
1. Remove the bolt and nut.
2. Remove the bolt and nut.
3. Remove the rear spring.
Installation
1. Install the rear spring.
1. Position the rear spring.
2. Install the nut and bolt.
3. Install the nut and bolt.
2. Connect the rear axle.
1. On 4x4 equipped vehicles, position the rear spring spacer.
2. Position the U-bolts.
3. Install the rear spring plate.
4. Install the nuts.
