F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
Windshield: Vehicle Damage Warnings
CAUTION:
^
Care must be taken to avoid scratching the pinch weld.
^
After replacing the urethane installed glass, the vehicle should not be driven until the urethane has cured. The curing times at temperatures above
13°C (55°F) and relative humidity above 50% is 12-24 hours (refer to Essex Drive Away Chart for cure times, as temperatures and humidity
vary). Inadequate curing of the urethane may adversely affect the strength of the urethane adhesive bond.
^
Wipe off the Urethane Glass Prep immediately after each application because it flash dries.
^
If a vehicle is to be driven within 24 hours of urethane adhesive application, Urethane Adhesive Essex U-216 meeting Ford specification
WSB-M2C316-B must be used due to its one hour cure time.
^
Open the windows to prevent the windshield glass from being pushed out by air pressure if a door is closed.
