F 150 4WD Pickup V8-5.4L VIN V Flex Fuel (2006)
Parking Assist Distance Sensor: Service and Repair
PARKING AID SENSOR
Removal
1. Disconnect the parking aid sensor electrical connector.
2. Press the retaining tabs to remove the parking aid sensor.
-
Remove the parking aid sensor from the rear bumper.
Installation
1. To install the parking aid sensor in the rear bumper, insert the sensor in the opening until the retaining tabs lock in position.
2. Connect the parking aid sensor electrical connector.
3. After installing the sensor(s), use the diagnostic tool to verify that the parking aid sensor PIDs read no object present and that the parking aid
sensor attenuation PIDs read between 0-16 ms.