F 150 4WD Pickup V8-5.4L VIN V Flex Fuel (2006)
![background image](/ford/f_150_4wd_pickup/v8-5.4l_vin_v_flex_fuel/Page-1032006.png)
8. Install the front axle housing LH front mounting bolt.
^
Tighten to 89 Nm (66 ft. lbs.).
9. Install the front axle housing LH rear mounting bolt.
^
Tighten to 89 Nm (66 ft. lbs.).
All vehicles
10. Position the frame crossmember and the 4 bolts.
^
Tighten to 102 Nm (75 ft. lbs.).
11. Attach the starter wiring harness support bracket.
12. Fill the crankcase with clean engine oil.