F 150 4WD Pickup V8-5.4L VIN V Flex Fuel (2006)
![background image](/ford/f_150_4wd_pickup/v8-5.4l_vin_v_flex_fuel/Page-1186001.png)
Oil Temperature Sensor For ECM: Service and Repair
OIL TEMPERATURE SENSOR
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the battery ground cable.
3. Remove the oil drain plug and drain the engine oil.
-
To install, tighten to 14 Nm (10 lb-ft).
4. Disconnect the oil temperature sensor electrical connector.
5. Remove the oil temperature sensor.
-
To install, tighten to 21 Nm (15 lb-ft).
6. To install, reverse the removal procedure.