F 150 4WD Pickup V8-5.4L VIN V Flex Fuel (2006)
![background image](/ford/f_150_4wd_pickup/v8-5.4l_vin_v_flex_fuel/Page-2173003.png)
10. Remove the nut and position the generator harness terminal and the CJB cable terminal (on the positive battery terminal) aside.
-
To install, tighten to 9 Nm (80 lb-in).
11. Remove the bolt and position the battery ground cable body terminal aside.
-
To install, tighten to 12 Nm (9 lb-ft).
12. Disconnect the battery cable harness in-line electrical connector and remove the battery cable assembly.
13. To install, reverse the removal procedure.