F 150 4WD Pickup V8-5.4L VIN V Flex Fuel (2006)
6. Install the 4 crossmember-to-frame nuts and bolts.
^
Tighten to 90 Nm (66 ft. lbs.).
7. Lower the transmission on the crossmember and tighten the rear mount nuts.
^
Tighten to 90 Nm (66 ft. lbs.).
8. Remove the high-lift transmission jack.
9. Install the bolt for the LH heat shield to the transmission support crossmember.
^
Tighten to 15 Nm (11 ft. lbs.).