F 150 4WD Pickup V8-5.4L VIN V Flex Fuel (2006)
Shift Cable: Adjustments
Selector Lever Cable Adjustment
Vehicles equipped with a floor shifter
1. Place the transmission range selector lever in the 1ST position toward the rear of the vehicle.
2. Move the transmission range selector forward 2 detents. This should be the (D) position.
Vehicles equipped with a column shifter
3. Rotate the gearshift lever clockwise until it bottoms out (1ST gear), then rotate the gearshift lever counterclockwise 2 detent positions ((D)
position).
4. Hang a 1.4 kg (3 lb) weight on the gearshift lever.
All vehicles
5. Position the vehicle on a hoist. For additional information, refer Maintenance/Service and Repair.
Vehicles equipped with a floor shifter
6. Rotate the cable adjustment lock upward and disconnect the shift cable from the transmission manual lever.
Vehicles equipped with a column shifter
7. Slide the shift cable adjustment lock upwards and remove the cable from the manual lever.
8. Rotate the manual lever forward until the travel stops. Then rotate the manual lever back 2 detents to the (D) position.
Vehicles equipped with a floor shifter