F 150 4WD Pickup V8-5.4L VIN V Flex Fuel (2006)
Transmission Speed Sensor: Service and Repair
Speed Sensors
NOTE: Only remove the affected sensor.
Removal
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
OSS Sensor
2. Disconnect the output shaft speed (OSS) sensor electrical connector.
3. Remove the OSS sensor bolt.
4. Remove the OSS sensor.
TSS Sensor
5. Disconnect the turbine shaft speed (TSS) sensor electrical connector.
6. Remove the TSS sensor bolt.
7. Remove the TSS sensor.
Installation
TSS sensor
1. Lubricate the O-ring seal and install the TSS sensor.
2. Install the TSS sensor bolt.
^
Tighten to 11 Nm (9 ft. lbs.).
3. Connect the TSS sensor electrical connector.
OSS sensor
4. Lubricate the O-ring seal and install the OSS sensor.