F 150 4WD Pickup V8-5.4L VIN V Flex Fuel (2006)
Fluid - M/T: Service and Repair
Transmission Draining and Filling
Material
1. Remove the drain plug and drain the transmission.
Position a suitable drain pan under the transmission.
2. Clean and install the drain plug.
^
Tighten to 48 Nm (35 ft. lbs.).
3. NOTE: Before removing, clean the area around the filler plug.
Remove the filler plug.
4. NOTE: Fill the transmission with the vehicle on a level surface.
Using a suitable oil suction gun, fill the transmission to the correct level with the specified fluid. The fluid must be just below the fill plug hole.
^
Transmission capacity is 3.5 liters (3.1 quarts).
5. Install the filler plug.
^
Tighten to 48 Nm (35 ft. lbs.).