F 150 Heritage 2WD Pickup V8-4.6L SOHC VIN W (2004)
6. Remove the (A) water pump from the (B) cylinder block.
^
Clean and inspect the mating surfaces.
Installation
1. CAUTION: Some vehicle cooling systems are filled with Motorcraft Premium Engine Coolant VC-4-A (in Oregon VC-5, in Canada CXC-10) or
equivalent meeting Ford specification ESE-M97B44-A (green color). Others are filled with Motorcraft Premium Gold Engine Coolant VC-7-A or
equivalent meeting Ford specification WSS-M97B51-Al (yellow color). Always fill the cooling system with the same coolant that is present in the
system. Do not mix coolant types.
Install the water pump.
1
Lubricate with engine coolant and install the O-ring seal.
2
Position the (A) water pump on the (B) engine.
3
Loosely install the bolts.
