F 150 Heritage 2WD Pickup V8-4.6L SOHC VIN W (2004)
Torx Bit Tool Set
SPECIAL TOOL(S)
REMOVAL
1. Disconnect and detach the driver safety belt switch.
2. Remove the front center and RH passenger safety belt buckle ends.
1
Use the special tool to remove the buckle bolts.
2
Feed the buckle assembly up through the top of the seat cushion and remove the front seat safety belt buckles.
3
Feed the LH driver buckle and center passenger tongue assembly up through the top of the seat cushion and remove the front seat safety belt
buckle/tongue assembly.
INSTALLATION
NOTE: Apply Ford Threadlock 262 (E2FZ-19554-B) or equivalent to fasteners when installing safety belt buckle or retractor assemblies.