F 150 Heritage 4WD Pickup V6-4.2L VIN 2 (2004)
![background image](/ford/f_150_heritage_4wd_pickup/v6-4.2l_vin_2/Page-2116004.png)
4. Install the brake pedal nut.
5. Load the pedal spring.
6. Connect the brake pedal motor electrical connector.
7. Install the brake pedal-to-accelerator pedal cable in the accelerator pedal.
8. Connect the battery ground cable.
9. CAUTION: When installing the brake pedal-to-accelerator pedal cable, the brake pedal and the accelerator pedal must be in the same position, all
the way forward or all the way rearward.