F 150 Heritage 4WD Pickup V6-4.2L VIN 2 (2004)
![background image](/ford/f_150_heritage_4wd_pickup/v6-4.2l_vin_2/Page-1967005.png)
5. Remove the pinion nut.
^
Use a suitable companion flange holding tool.
6. Remove the rear axle pinion flange, using the special tool.
^
Remove the rear axle drive pinion seal.
^
Remove the rear axle drive pinion shaft oil slinger.
7. Install the special tool and, with a soft-faced hammer, drive the pinion out of the front bearing cone and remove it through the rear of the housing.
8. NOTE: Remove the collapsible spacer and discard it.
Using the special tool, remove the pinion bearing.