F 150 Heritage 4WD Pickup V8-5.4L SOHC VIN Z Bi-fuel (2004)
![background image](/ford/f_150_heritage_4wd_pickup/v8-5.4l_sohc_vin_z_bi-fuel/Page-3064001.png)
Truck Bed Cover: Service and Repair
Tonneau Cover - Side Rail
TONNEAU COVER - SIDE RAIL
Removal
1. Roll up the tonneau cover.
2. Open the tailgate.
3. Remove the tonneau cover rear rail.
1
Push down the release handle.
2
Remove the tonneau cover rear rail.
4. Remove the tonneau cover rear rails.
5. Remove the side rail.
1
Loosen the screws.
2
Remove the side rail.
-
Unhook the side rail from the front rail.
Installation
1. NOTE: If equipped with a bed liner, the bed liner must be positioned fully forward.
Loosely install the side rail.
1
Hook the side rail to the front cross rail.
2
Tighten the side rail screws until the side rail clamps lightly contact the pickup bed side rail.
2. Install the tonneau cover rear rail.