F 150 Heritage 4WD Pickup V8-5.4L SOHC VIN Z Bi-fuel (2004)
![background image](/ford/f_150_heritage_4wd_pickup/v8-5.4l_sohc_vin_z_bi-fuel/Page-2020001.png)
Parking Pawl: Service and Repair
Park System
Removal
1. Remove the extension housing and the extension housing gasket.
2. Remove the parking rod guide plate.
1
Remove the bolts.
2
Remove the parking rod guide plate.
3. NOTE: If the park gear replacement is required. refer to Output Shaft - Check.
Remove the park pawl shaft.
1
Remove the park pawl return spring.
2
Remove the park pawl.
3
Remove the park pawl shaft.
Installation
1. NOTE: If the park gear replacement is required. refer to Output Shaft - Check.
Install the park pawl shaft.
1
Install the park pawl shaft.
2
Install the park pawl.
3
Install the park pawl return spring.