F 150 Heritage 4WD Pickup V8-5.4L SOHC VIN Z Bi-fuel (2004)
Shift Interlock Cable: Service and Repair
Cable and Bracket
Removal and Installation
All vehicles
1. NOTE: To prevent shift cable damage, do not apply force to the shift cable assembly between the steering column shift tube bracket and the
steering column bracket.
Disconnect the transmission shift cable from the steering column.
1
Disconnect the transmission shift cable from the steering column shift tube lever.
2
Carefully lift the locking tab and remove the transmission shift cable from the steering column bracket.
2. Disconnect the shift cable push pin from the stud in the bulkhead.
3. Push the rubber grommet and transmission shift cable through the bulkhead.
4. Raise and support the vehicle.
5. NOTE: To prevent shift cable damage, do not apply force to the shift cable assembly between the manual control lever and the shift cable
bracket.
Remove the transmission shift cable from the transmission.
1
Disconnect the transmission shift cable from the manual control lever.
2
Depress the lock tabs to release the transmission shift cable and disconnect the transmission shift cable from the transmission shift cable
bracket.
4.6L or 5.4L engines with 41170W transmission
6. Remove the shift cable bracket from the transmission.
1
Remove the bolts.