F 150 Heritage 4WD Pickup V8-5.4L SOHC VIN Z Bi-fuel (2004)
![background image](/ford/f_150_heritage_4wd_pickup/v8-5.4l_sohc_vin_z_bi-fuel/Page-2135002.png)
5. Remove the bearing cups and driveshaft centering socket yoke.
1
Position the driveshaft center yoke in the special tool.
2
Press out a bearing cup.
3
Rotate the driveshaft center yoke 180 degrees.
4
Press on the spider to remove the opposite bearing cup.
5
Remove the driveshaft centering socket yoke.
6. Remove the bearing cup and the spider.
1
Position the driveshaft centering socket yoke in the special tool.
2
Press out a bearing cup.
3
Rotate the driveshaft centering socket yoke 180 degrees.
4
Press on the spider to remove the opposite bearing cup.
5
Remove the spider and the bearing cup.
7. Remove the centering cup spring.
8. Remove the four remaining snap rings.