F 150 Heritage 4WD Pickup V8-5.4L SOHC VIN Z Bi-fuel (2004)
2. CAUTION: Do not damage the wheel bearing oil seal.
Install the two axle shafts.
3. CAUTION: Do not damage the rubber O-rings in the U-washer grooves.
Install the U-washers.
1
Position the two U-washers on the button end of the axle shafts.
2
Pull the axle shafts outward.
4. NOTE: If a new pinion shaft lock bolt is unavailable coat the threads with threadlock prior to installation.
Install the differential pinion shaft.
1
Align the hole in the differential pinion shaft with the case lock bolt hole.
2
Install a new differential pinion shaft lock bolt.
Vehicles with drum brakes
5. Install the rear brake drums.