ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Keyless Entry > < Alarm System Transponder|Locations|Page 8086
Page 2
background image

6. Remove the anti-theft transceiver module.

1

Remove the screw from the bottom of the transceiver module.

2

NOTE:  Only apply pressure or leverage below the key cylinder lower rib.

Disconnect the electrical connector and remove the module.

INSTALLATION

1. NOTE:  When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive

strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.

To install, reverse the removal procedure.

Keyless Entry > < Alarm System Transponder|Locations|Page 8086