F 150 Super Crew 4WD V8-5.4L Prop SOHC VIN Z (2003)
![background image](/ford/f_150_super_crew_4wd/v8-5.4l_prop_sohc_vin_z/Page-1454002.png)
NOTE: The EGR valve sealing surfaces are soft metals.
2. Install the EGR valve.
^
Tighten the two bolts in two stages.
^
Stage 1: Tighten the bolts to 20 Nm (15 Lb-Ft).
^
Stage 2: Tighten the bolts an additional 90 degrees.
3. Connect the EGR valve.
^
Connect the EGR valve tube.
^
Connect the vacuum line.
4. Position the bracket and install the nut.
5. Position the accelerator control splash shield and install the bolts.