F 150 Super Crew 4WD V8-5.4L Prop SOHC VIN Z (2003)
Wheel Fastener: Service and Repair
Wheel Studs
Special Tool(s)
Special Tool(s)
Removal
CAUTION: Never use a hammer to remove the wheel bolt. Damage to the axle flange, hub flange, wheel bearing or hub bearing can result.
All vehicles
1. Raise the vehicle and install safety stands.
2. Remove the wheel and tire assembly.
Vehicles with rear disc brakes
3. Remove the rear disc brake caliper, rear disc support bracket and brake disc if so equipped. Support rear disc brake caliper with safety wire.
Vehicles with drum brakes
4. Remove the rear brake drum.
5. Using C-Frame and Clamp Assembly Tool, press the wheel bolt from its seat and discard.
Installation
CAUTION: Never use air tools to install wheel bolts. The serrations can be stripped from the stud.
All vehicles
1. Insert a new wheel stud in the hole on the axle flange or hub flange, making sure serrations are aligned with those made by the original wheel bolt.
2. Seal new wheel stud in axle flange or hub flange.