F 150 Super Crew 4WD V8-5.4L SOHC VIN L (2001)
![background image](/ford/f_150_super_crew_4wd/v8-5.4l_sohc_vin_l/Page-3185002.png)
5. Pry the window frame from the door.
6. Remove the excess foam butyl from the window opening.
INSTALLATION
1. Apply 8 mm foam butyl, or equivalent meeting Ford specification WSB-M2G234-C to the rear window frame.
^
Start at the bottom middle and work around the frame.
NOTE: When applying foam butyl, leave a slight overlap at the bottom to allow for drainage.
2. Install the rear window frame and glass.
1
Position the rear window frame and glass.
2
Tighten the nuts to specification.
NOTE: Loosely install all nuts before tightening.
3. Install the rear door window garnish.
4. If equipped, install the rear door window latch screws.