F 250 2WD HD Pickup V8-7.3L DSL Turbo VIN F (1997)
NOTE: Silicone Rubber sealant starts to set up after being exposed to air. Assembly must be completed within 15 minutes of sealant application.
2. Install the engine front cover and the four retaining bolts finger-tight.
3. Install the water pump.
4. Tighten the four engine front cover bolts to 20 Nm (15 ft. lbs.).
5. Install the oil pan and oil pump screen cover and tube.
6. Install the crankshaft vibration damper.
7. Install the engine.