F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
Remove Rear Wheel Disc Brake Shield
-
Remove the rear wheel disc brake shield.
1
Drill out the two rivets.
2
Remove the rear wheel disc brake shield.
INSTALLATION:
-
To install, reverse the removal procedure.
NOTE: Because the rear wheel disc brake shield is held in position by the four rear wheel disc brake adapter bolts, new rivets are not required.
^
Seal the rivet holes with Silicone Rubber D6AZ-19652-AA or equivalent meeting Ford specification ESB-M4092-A.