F 250 2WD LD Pickup V8-5.4L SOHC VIN L (1997)
4.
Inspect both front sensor bodies for improper seating to the spindle housing. Inspect the tone ring for dents, flat spots, chips or other irregularities.
The sensor bracket flange should be completely flush to the spindle housing (Figure 3). If any gap is present, then replace the sensor assembly with
a new front wheel speed sensor.
5.
If sensor replacement is required, all surfaces including the hole where the sensor body is inserted must be free of rust build-up. Use a wire brush
or die grinder to thoroughly clean all surfaces where the sensor seats.
PART NUMBER
PART NAME
XL3Z-2C204-BB
Front wheel Speed Sensor (RH)
XL3Z-2C205-AB
Front wheel Speed Sensor (LH)
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 99-4-11
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
991313AB
Extra Time To Replace
0.2 Hr.
One (1) Front Wheel
Sensor
991313AC
Extra Time To Replace
0.3 Hr.
Two (2) Front Wheel
Sensors
991313A
Test ABS System And
0.7 Hr.
Inspect Both Front Sensors
DEALER CODING
CONDITION
BASIC PART NO.
CODE
2C204
07
OASIS CODES: 206000, 301000, 702000