F 250 2WD LD Pickup V8-5.4L SOHC VIN L (1997)
Valve Body: Service and Repair
Removal
NOTE: If the transmission has been disassembled to replace worn or damaged parts, and the valves in the main control valve body stick repeatedly
from foreign material, the torque converter must be removed and cleaned by using a mechanically agitated cleaner, such as the Torque Converter/Oil
Cooler Cleaner.
1. Remove the transmission fluid level indicator.
2. Remove the fluid pan gasket and filter.
3. Disconnect the solenoid pack electrical connector.
4. Disconnect the harness connector at the digital transmission range (DTR) sensor.
5. Remove the accumulator body.
(1) Remove the bolts.